Audiovector Trapeze Reimagined — A New Angle on Audio Perfection

The Audiovector Trapeze Reimagined is the flagship floorstanding loudspeaker that bridges heritage and innovation. Reviving its original 1979 “Trapez” lineage, it preserves core design philosophies—linear dynamics, true 6 dB-per-octave crossover, full positive polarity—and elevates them with advanced modern technology and materials.
With a bold, angled cabinet and richly detailed sound, it stands as both a visual statement and an uncompromising audio instrument.

Key Design Highlights & Technical Philosophy

3-Way Architecture & Driver Complement

• Utilises a 12-inch high-power mid/bass driver on the front baffle, partnered with an 8-inch internal driver in a novel Isobaric Compound Bass arrangement.

• A 5-inch high-speed midrange handles the critical midband, while a dedicated AMT (Air Motion Transformer) tweeter covers the top end with speed, clarity, and minimal distortion.

• The drivers are aligned both acoustically and temporally, enabling seamless transitions with a linear-phase, 6 dB/octave crossover at 500 Hz and 3,000 Hz.
Isobaric Compound Bass System

Instead of a conventional isobaric pair in identical sealed chambers, the Trapeze’s internal 8-inch driver sits behind and shares pressure equilibrium with the 12-inch front unit. A port connects the two chambers, allowing them to function as a unified bass source, achieving deeper low frequency extension with more control, lower distortion, and compact impact. This arrangement delivers powerful, tight bass without boom or color.

Cabinet Engineering & Acoustic Control

• The trapezoidal (lopsided) front baffle geometry disrupts internal standing waves by avoiding parallel walls, improving clarity.

• Around the midrange and tweeter areas, diffraction-absorbing felt is applied to soften reflections and maintain a “point-source” behavior.

• A double mechanical decoupling base and plinth structure reduce interaction between cabinet and floor, isolating the sound output.

• The cabinet is heavily braced and crafted from dense high-density materials, with precision veneering in real wood finishes or custom paints.
Tunability and Versatility

• A three-position damping switch on the rear terminal plate enables tailoring of response based on amplifier damping factor (for tube vs solid-state amplifiers).

• Freedom Grounding is offered via a dedicated connection—this circuitry helps reduce induced currents between drivers, lowering the noise floor and improving overall transparency.

• Binding posts support 4 mm plugs or spades.

Acoustic Performance & Listening Experience

• Frequency response claims: 23 Hz – 53 kHz, delivering both deep bass and extended treble.

• Sensitivity: ~88 dB SPL at 1 m / 2.83 V (some reports credit up to ~92.5 dB in optimal conditions).

• Nominal impedance: 8 Ω, with a minimum of ~6.5 Ω at 20 kHz.

• Distortion: < 0.2% THD at 90 dB SPL.

• Crossover frequencies: 500 Hz and 3,000 Hz.

In listening tests, reviewers consistently highlight the Trapeze’s ability to blend sheer power with refinements such as natural midrange tonality, articulate voicing, and a holographic, immersive soundstage. It can dig deep into bass passages without losing speed or control, and broad dynamic swings are handled with composure.

Positioning is more forgiving than many high-end speakers: a starting point of ~70 cm from the back wall often yields excellent results.

Its inherent toe-in from the angled baffle helps aim the sound focus without requiring excessive speaker rotation.

Specifications at a Glance

Frequency Response 23 Hz – 53 kHz
Sensitivity ~88 dB SPL @ 1 m
Nominal Impedance 8 Ω
Minimum Impedance 6.5 Ω (≈20 kHz)
Distortion (90 dB SPL) < 0.2% THD
Crossover Frequencies 500 Hz, 3,000 Hz
Bass System 12″ driver + internal 8″ isobaric pair
Midrange Driver 5″ high-speed
Tweeter SEC AMT (open-back AMT design)
Dimensions (H × W × D) 87.5 × 42 × 43.5 cm
Terminals Gold-plated binding posts + Freedom grounding

Cabinet Finishes & Aesthetics

The Trapeze Reimagined is available in premium real wood veneers, including Nordic Oak, Black Ash, Italian Walnut, and White Silk. For a more striking look, custom piano-lacquer finishes are also offered. A black cloth grille is included as standard, magnetically attached and acoustically transparent.
Its angled front and asymmetric form give it a distinctive visual identity, while still maintaining elegance and presence in any listening environment.

Why Choose Trapeze Reimagined?

• Audio legacy meets modern engineering — honours the spirit of the original 1979 Trapez while benefitting from 21st-century innovations.
• Exceptional bass control — thanks to the Isobaric Compound Bass design, the speaker reaches deep low frequencies with authority and clarity.
• Linear-phase crossover & time alignment — ensures diaphonic coherence and natural timing across drivers.
• Flexibility + system matching — damping switch and grounding option let you fine-tune the speaker to your amplifier and room.
• Rich, immersive musical experience — dynamic, balanced, and capable of both subtle nuance and full-scale expression.

Contact us to discuss your requirements and to arrange a demonstration.