AUDITE ACOUSTICS - Brij Isolation Platforms
Audite Acoustics, a UK- based company, design and manufacture class-leading and innovative audio isolation products for turntables, shelf-mounted electronics and floor platform amplifiers.
Products which represent tremendous value for money is at the forefront of what we do. Unwanted sounds and vibrations travel and propagate through materials and this is well known and understood. Effective isolation doesn’t necessarily require expensive materials or overly engineered solutions.
There’s no getting away from the fact that whatever we use to mount our equipment, feet must be used and as such minimising the surface area of contact becomes a key objective in reducing unwanted vibrations, noise and interference. Minimising the surface area of any coupling was at the forefront of our minds when designing and developing the new ISOL-X technology.
The ISOL-X technology uses true innovation and effective design allied with the right materials to produce a unique platform that reduced vibrations and resonances which leading to greater detail and clarity.
The unique ISOL-X suspension system uses three key methods to decouple and isolate equipment. The first two are a wood substitute (HDF) and air. Moisture resistant HDF (High Density Fibre board) is known to provide effective damping and reduces vibrations and resonances that’s why its used extensively in the manufacture of so many isolation platforms, turntable plinths and speakers. By combining a platform made from HDF along with an air gap beneath it increases the performance even further. However, our technology allows us to take isolation to a new level.
The ISOL-X uses a third and arguably even more effective method which is the true innovation:
The design incorporates another HDF base which is decoupled from the audio rack via Sorbothane feet which provide an air gap beneath. A second HDF floating platter is decoupled from the rest of the system by a specially designed Isolation Suspension System (ISOL-X). The suspension points exhibit superb audio isolation but more importantly, each point is approximately 0.5mm in diameter whilst providing an incredibly high tensile strength. Therefore the floating platters only physical connection to any other part of the system is limited to around 1mm of surface area. The floating platter is also free to move laterally, by about 8mm in any direction and as such does not touch anything around its sides, top or bottom.
Designing the ISOL-X System was never an exercise in making something to sell; it started off as do most great products as an idea that had been kicking around for years. The very first prototype was so innovative and successful that we knew that we had to make it available to the audiophile. However, with a market awash with products we set ourselves the goal of making a product that was truly innovative, took isolation to a new level and was affordable.
The ISOL-X system has been designed and manufactured in the UK using local suppliers wherever possible and our packaging is 100% recyclable.
The best Audiophile equipment deserves more than just ordinary isolation . . . ISOL-X Isolation technology that’s far from ordinary!
Performance audio isolation.
Traditionally isolation platforms have always been associated with turntables but all sensitive audio equipment can also benefit hugely from good isolation.
Utilising our own ISOL-X technology which is a quantum leap in isolation, the Brij represents true innovation in a market where for many years wooden chopping boards seem to be the extent of a designer’s skills and ambition.
The original Brij isolation platform has taken isolation to a whole new level through innovation and design and compliments larger furniture making a stunning statement where function and from go hand in hand.
In response to customer feedback, the existing ISOL-X suspension technology produced another Brij design for audio specific racks and furniture where the width of the rack is limited.
Brij Nedan 2.0 Isolation Platform
Audite's original Brij isolation platform has taken isolation to a whole new level through innovation and design and compliments larger furniture making a stunning statement where function and from go hand in hand.
In response to customer feedback, Audite adapted the existing ISOL-X suspension technology and yet again produced another design masterpiece for audio specific racks and furniture where the width of the rack is limited.
Moor Amps Angel Amplifiers Brij Platform
The quality and effectiveness of our Brij Platform continues to gain recognition and praise in the industry so much so that we were asked by high end retailer, Brianandtrevors, if we could build a platform specifically for the Moor Amps Angel 6 and Angel 4 amplifiers.
See the difference you can hear with Brij Isolation Platforms
The sonic impact of the Brij is evident. Measured data from one of the first charts and a week of testing.
Satin Black, Satin White and Teak finishes.
Contact us for a demonstration and purchase. We also offer Brij home dems.