Naim Cables

During the development of Statement, Naim Audio's flagship amplification system, Naim engineers realised that they would need to design a whole new range of high-performance cables for it to reach its true potential.

With this in mind they began a development project to design interconnects and speaker cable that would meet Statement standards of performance. Through a deep understanding of material science and after thousands of hours testing in the listening room, the Super Lumina range was born.

Designed to maximise the performance of Statement but equally at home in 500 Series and Classic Series systems, Super Lumina pre to power amp interconnects are available with DIN to XLR, and XLR to XLR terminations. Super Lumina source to preamplifier interconnects are available with DIN to DIN, DIN to RCA, RCA to RCA and RCA to XLR connectors.

Naim's Hi-Line cable range also shares many of the features employed in Super Lumina but at a more affordable investment and of course the traditional Naim cable range is available to provide the ideal impedance, capacitance and conductivity for Naim Audio products.

Naim Super Lumina

During the development of Statement, Naim Audio's flagship amplification system, Naim engineers realised that they would need to design a whole new range of high-performance cables for it to reach its true potential.

With this in mind they began a development project to design interconnects and speaker cable that would meet Statement standards of performance. Through a deep understanding of material science and after thousands of hours testing in the listening room, the Super Lumina range was born.

Designed to maximise the performance of Statement but equally at home in 500 Series and Classic Series systems, Super Lumina pre to power amp interconnects are available with DIN to XLR, and XLR to XLR terminations. Super Lumina source to preamplifier interconnects are available with DIN to DIN, DIN to RCA, RCA to RCA and RCA to XLR connectors.

Also available the Super Lumina speaker cables have the option of either 4mm or spade connectors.

RS2410_super-lumina-20-lpr-(1)
hiline_3_0

Naim Hi-Line

During the development of the reference CD555 CD player, a special project ran in parallel; to develop a new signal cable that would exceed the performance Naim's standard signal cable. The brief was to investigate all parameters of a signal carrier; to improve the whole rather than just improving the cable as is the more normal development practice.

The result of this pure development project is the Hi-Line signal cable. Available with both DIN and RCA terminations, its patented Air-PLUG connector is a decoupling device that reduces vibration transmitted along the cable itself, preserving your system’s precious musicality.

Naim Snaic

The SNAIC family of interconnects use a cable which is custom manufactured to Naim's specification to provide the ideal impedance, capacitance and conductivity for Naim Audio products.

Each SNAIC interconnect is meticulously hand-built in-house using established production techniques.

snaic_2_0
burndy_2_0

Naim Burndy

Burndy cables carry both signal and power, and feature dedicated, multi-pin, locking connectors. They are used with several of Naim's power supplies and care should be taken to ensure that the correct cable is used in each application - the configuration of the cables varies with the particular units that are being linked.

The SXPS Burndy variant is used for the CDX, NDS, NDX, ND5 XS, DAC and HDX source products. There is also a Burndy variant for use with the SUPERLINE phonostage and the SNAXO and SNAXO BMR crossovers.

 

Our brands:

 ATC LoudspeakersBooplinthChord CablesEntreqGraham Audio LoudspeakersHouse of LinnInnuosLinn ProductsMelcoNaim AudioQuadraspireRELSonoma AcousticsVitus Audio.

Copyright © 2018 Brian and Trevor’s House of Hi-Fi